| Last Modified: 11-29-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Navigation/Multi Info Display | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001033015X |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: INSPECTION PROCEDURE (2008 Sequoia) | ||
|
CD Sound Skips |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CLEAN CD |
|
(a) If the disc is dirty, clean the disc by wiping the CD's underside radially with a soft cloth. OK: Malfunction disappears. NOTICE:
Do not use a conventional record cleaner or antistatic preservative. |
|
|
2. |
REPLACE CD WITH ANOTHER AND RECHECK |
(a) Replace the CD with a normal one and check if the same problem occurs again.
OK:
Malfunction disappears.
|
|
3. |
CHECK WHEN PROBLEM OCCURS |
(a) Check the location in which CD skipping occurs.
Result
|
Result |
Proceed to |
|---|---|
|
Driving surface is bumpy or rough |
A |
|
Driving surface is normal |
B |
|
|
4. |
CHECK NAVIGATION RECEIVER ASSEMBLY INSTALLATION |
(a) Check the installation condition of the navigation receiver assembly.
OK:
Installed properly.
|
|
5. |
INSTALL NAVIGATION RECEIVER ASSEMBLY IN ANOTHER VEHICLE OF SAME MODEL AND COMPARE |
(a) Remove the navigation receiver assembly and install it in another vehicle of the same model. Check if the CD sound skips.
OK:
CD sound does not skip.
|
|
6. |
DID TEMPERATURE IN CABIN CHANGE RAPIDLY? |
(a) Check whether or not a rapid temperature change occurred in the cabin.
OK:
Rapid temperature change occurred.
HINT:
A rapid temperature change creates condensation inside the CD player, which may disable CD playback.
|
|
|